Ac/dc input connector, j5, and ground stud – AMETEK ReFlex User Manual
Page 54
ReFlex Power™
Mainframe
M380056-01 Rev J
2-19
J2, DIGITAL CTRL IN:
connector used in multi-Mainframe systems that
provides digital control signals to a preceding
Mainframe further up in the daisy-chain
J3, ANALOG CTRL OUT: connector used in multi-Mainframe systems that
provides analog control signals to a following
Mainframe further down in the daisy-chain
J4, ANALOG CTRL IN:
connector used in multi-Mainframe systems that
provides analog control signals to a preceding
Mainframe further up in the daisy-chain
J5, AC/DC INPUT:
input connector for the AC/DC input power
GND:
safety ground stud
WARNING
To prevent electrical shock, disconnect the AC/DC input
service before making any connections to the Mainframe.
AC/DC
I
NPUT
C
ONNECTOR
,
J5,
AND
G
ROUND
S
TUD
The AC/DC input power is connected through a plug/socket connector, J5, on the
rear panel of the Mainframe. Refer to Figure 2-7 for a view of the connector. The
pinout and functions of the connector are presented in Table 2-4. The associated
maximum wire gauge for connector terminations, and recommended maximum
wire lengths, are presented in Table 2-10. Table 2-5 presents information on the
safety ground stud.
J5 is the AC/DC input power connector to a Mainframe. AMETEK Mating Connector Kits:
• ReFlex Power™ Mainframe AC/DC Input Mating Connector Kit - AMETEK Part
No. 5380318-01, mates with RFP-M000-001-0000, RFP-M000-001-1E00, and
RFP-M000-001-2J00, and includes the following:
Bill of Material
Item
AMETEK
Part No.
Description
Qty
Manufacturer
Part No.
Manufacturer
Suggested Source(s)
1
855-130-02
Conn, 7P, 8AWG, Plug, P-
Earth, S
1
DL3106A24-10S
Amphenol
Arrow Electronics:
Newark:
2
855-16A-X3
Conn, Cable Clamp, SS
24/28 w/Bushing
1
M85049/41-16A, or
MS3057-16A
ITT Cannon, Amphenol
/ Bendix
PEI-Genesis:
• ReFlex Power™ Mainframe AC/DC Input Mating Connector Kit with 2-Meter Unterminated AC
Line Cord - AMETEK Part No. 5380317-01, mates with RFP-M000-001-0000, RFP-M000-001-
1E00, and RFP-M000-001-2J00, and includes the following:
Bill of Material