Mating connector kit, Interface connector – AMETEK ReFlex User Manual
Page 294
ReFlex Power™
Active Loads
M380056-01 Rev J
7-19
the AC input leakage current could exceed 3.5mA, a second safety
ground connection is required. It should be connected to the safety
ground stud on the rear panel of the Mainframe.
WARNING
A separate, dedicated safety ground wire must be connected to the
Mainframe rear panel safety ground stud. Operating the ReFlex Power™
system with the safety ground wire disconnected could result in a shock
hazard.
M
ATING
C
ONNECTOR
K
IT
Load (HPAL/LPAL) Mating Connector Kit - AMETEK Part No. 5380273-01, mates
with RFP-L3500-375-XXXX and RFP-L3500-750-XXXX, and includes the
following for both the Interface and DC Input connectors:
Bill of Material
Item
AMETEK
Part No.
Description
Qty
Manufacturer
Part No.
Manufacturer
Suggested Source(s)
1
855-363-08
Conn, 4P, 8/16AWG, Plug,
SR, Skt
1
MS3106F-20-24S
Amphenol,
ITT Cannon
PEI-Genesis:
Arrow Electronics:
2
856-214-09
Conn, 9P, DSUB, 20-
24AWG, Crimp, Male
1
SD9M1000Z
Positronic Industries
Positronic Ind.
3
856-247-10
Conn, Backshell, 9P,
DSUB, 2 PC
1
D9000Z00
Positronic Industries
Positronic Ind.
R
ECOMMENDED
T
OOLS
(N
OT
I
NCLUDED WITH
M
ATING
C
ONNECTOR
K
IT
)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02
I
NTERFACE
C
ONNECTOR
The user Interface connector (see Figure 7-6 with wiring diagram) provides
terminations for external connections to digital and analog control signals (see
Table 7-2 for pinouts).
Connector: Positronic Industries P/N SD9M1000Z, AMETEK P/N 856-214-09
Crimp contacts: Positronic Industries P/N MC7520D (initially supplied with connector)
Backshell: Positronic Industries P/N D9000Z00, AMETEK P/N 856-247-10
Wire size: Maximum gauge 20 AWG (22 AWG recommended)
Maximum length 10 meters.