AMETEK ReFlex - Manual (Page 33)

ReFlex Power™ System Overview
M380056-01 Rev J 1-11
Hold-Up Time
10ms, with dropout of AC input at full output power except
RFP-D2050-025-xxxx: 8 ms, with dropout of AC input at full output power
Aggregate Output Power
Depends on module complement and input voltage: With AC input
voltage
≥ 200VAC or DC input, 6kW maximum; with AC input voltage
< 200VAC, 3.6kW maximum
1.3.5
E
NVIRONMENTAL
C
HARACTERISTICS
The ReFlex Power™ system has been ruggedized to MIL-PRF 28800F
requirements for Class 3. It is capable of operating in military
environments, with enhanced capabilities to withstand harsh
environmental conditions of temperature, altitude, shock/vibration, and
input power.
O PERATING E NVIRONMENTAL C ONDITIONS
Temperature:
Standard: 0 to 50
°C
Extended Range Option: -10 to 55
°C
Altitude:
Standard: 0 to 6,500 feet
Extended Range Option:
Low-Power DC, High-Power DC, Fixed-Power DC, AC Power, and
Low-Power Load assets: 0 to 15,000 feet
High-Power Load asset: 0 to 15,000 feet, with linear temperature
derating from 55
°C at 6,500 feet to 40°C at 15,000 feet, or with linear
power derating from 750W at 6,500 feet to 600W at 15,000 feet
Humidity:
95% non-condensing
Shock:
Class 3 MIL-PRF-28800F
Vibration:
Class 3 MIL-PRF-28800F
Operation Without Fully Populated Mainframe:
If Mainframe is not fully populated with modules, filler panels must be
installed in empty slots to maintain proper airflow and structural
integrity.