7 connectors, Mating connector kit, Ac outputs – AMETEK ReFlex User Manual
Page 107
AC Power Supplies
ReFlex Power™
4-22
M380056-01 Rev K
4.4.7
C
ONNECTORS
The AC power supply module has all user interface connectors located on the
front panel. Two connectors are provided: one for the power connections to the
load, and the other for control signal interface.
M
ATING
C
ONNECTOR
K
IT
ACPS Mating Connector Kit - AMETEK Part No. 5380272-01, mates with RFP-A301K-
875-XXXX and RFP-A305K-875-XXXX, and includes the following for both Interface and
DC output connectors:
Bill of Material
Item
AMETEK
Part No.
Description
Qty
Manufacturer
Part No.
Manufacturer
Suggested Source(s)
1
856-214-07
Conn, 13P, DSUB,
8/20AWG, Male
1
CBD13W6M2000Z
Positronic Industries
Positronic Ind.
2
856-745-53
Contact, F-Volt,
3600VRMS, 500C,
Male
6
MS4820D-50
Positronic Industries
Positronic Ind.
3
856-247-39
Conn, Backshell,
37P, Strt, 2 PC
1
D37000Z00
Positronic Industries
Positronic Ind.
4
856-214-09
Conn, 9P, DSUB,
20-24AWG, Crimp,
Male
1
SD9M1000Z
Positronic Industries
Positronic Ind.
5
856-247-10
Conn, Backshell,
9P, DSUB, 2 PC
1
D9000Z00
Positronic Industries
Positronic Ind.
R
ECOMMENDED
T
OOLS
(
NOT INCLUDED WITH
M
ATING
C
ONNECTOR KIT
)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0.
Insertion/extraction: Positronic Industries P/N M81969/1-02
Pins A1 through A6 insertion/extraction: Positronic Industries P/N 4311-0-0-0
WARNING
To prevent electrical shock, disconnect the AC/DC input service before
making any connections to the module
.
AC
O
UTPUTS
The AC Output connector provides terminations for the output and remote
sense connections to the load. Refer to Figure 4-6 for a view of the AC output
connector showing pin numbers. The pinout and functions of the AC output
connector signals are presented in Table 4-2.
Connector: Positronic P/N CBD13W6M2000Z, AMETEK P/N 856-214-07
Pins A1-A6: Positronic Industries P/N MS4820D-50, AMETEK P/N 856-745-53