Metrohm tiamo 2.3 Patch 1 - Manual (Page 469)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 453
Return immediately
on | off (Default value: off)
If this option is enabled, then the program does not wait for this track to
be completed, but rather sends an acknowledgement immediately to the
track with the CALL command. From now on, both tracks will be running
simultaneously.
Delete old data
on | off (Default value: off)
All data previously generated by a track will be deleted at each new start
of this track when this option is activated.
Command variables
The following command variables are generated in the method run by the
command TRACK and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command
has never ended
5.6.2.4 SERIES START
Dialog window: Method ▶ SERIES START ▶ Properties.. ▶ SERIES START 'Com-
mand name'
Start command for series start track.
Appearance
The command has the following appearance:
Parameters
Command name
Name of the command.
Input 25 characters