Metrohm tiamo 2.3 Patch 1 - Manual (Page 1577)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 1561
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.16 089 Photometer
7.16.1 089 Photometer - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties… ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the 089 Photometer are set on the following tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Settings
Information on light source and heater.
￭ Adjustment
Information on the determination of the transmission factor.
￭ MSB #
Information on dosing preparation and connected devices.
￭ GLP
Information on GLP tests and GLP monitoring.
7.16.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
On the tab General, general properties of the device are displayed.
Device name
Designation of the device (can be freely defined by user).
Input 50 characters
Default value Device type number_#
Device type
Display of the device type.
Program version
Shows the program version of the device.