Metrohm tiamo 2.3 Patch 1 - Manual (Page 1407)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 1391
6.7 Subwindow Sensors
6.7.1 Sensors - General
Subwindow: Configuration ▶ Sensors
Subwindow Sensors
The subwindow Sensors contains the Sensor table with automatically rec-
ognized and manually added sensors. It can be shown in a separate win-
dow in the program part Configuration as a part of the Configuration
view or (if not present on the desktop) with View
▶ Quick access. The
subwindow can be enlarged and reduced as required; it can also be maxi-
mized.
Intelligent sensors (IS)
Intelligent sensors have a data chip with stored sensor data. When con-
nected to intelligent devices (e.g. 857 Titrando) via 854 iConnect, they
are recognized automatically and stored in the sensor table.
Non-intelligent sensors
Non-intelligent sensors must be added manually to the sensor table.
Standard sensors
The sensor table contains the following sensors as standard; these cannot
be deleted:
￭ Conductivity sensor
￭ ISE electrode (ion-selective electrode)
￭ Metal electrode
￭ pH electrode
￭ Temperature sensor
6.7.2 Sensor table
6.7.2.1 Sensor table
Subwindow: Configuration ▶ Sensors
Contents
In the sensor table the following information about the configured sensors
is shown as standard:
Sensor name
Name of the sensor.
Sensor type
Type of the sensor. Intelligent sensors will be marked with IS and shown
automatically in green.