4 lift, 1 lift - overview, Lift – Metrohm tiamo 2.3 Patch 1 User Manual
Page 1232
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
1216
■■■■■■■■
tiamo 2.3 Patch 1
Range
10 ... 55 °/s
Default value
55 °/s
5.6.7.4
LIFT
5.6.7.4.1
LIFT - Overview
Dialog window: Method
▶ LIFT ▶ Properties... ▶ LIFT - 'Command name'
Command for moving to a Work position, Shift position, Rinse
position and Special position with a Sample Processor.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 855, 864, 874.
Appearance
The command has the following appearance:
Parameters
The parameters for the command LIFT are configured in the following
dialog window:
■
Command variables
The following command variables are generated in the method run by the
command LIFT and can be used in formulas under the designation 'Com-
mand name.Variable designation':
Identifi-
cation
Description
.BSY
Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN
Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
.LPO
Current absolute lift position in mm (entry when ending
the command)