Metrohm tiamo 2.3 Patch 1 - Manual (Page 1230)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1214 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Identifi-
cation Description
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
.SAN Current, absolute swing angle of the robotic arm in °
(entry upon ending the command)
.SPO Current external position (entry when ending the com-
mand); 0 means invalid position
5.6.7.3.2 SWING - Properties
Dialog window: Method ▶ SWING ▶ Properties... ▶ SWING - 'Command name'
Command name
Name of the command.
Input 25 characters
Device
Device name
Selection of a device from those available in the device table. The only
devices which shall be offered are those with which the command can
run.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the
device type belonging to the selected device is displayed instead
If the option not defined is selected as Device name, any device types
or device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection Device types | 814 USB Sample Processor
Default value 814 USB Sample Processor