Metrohm tiamo 2.3 Patch 1 - Manual (Page 1615)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 1599
8.4.4.4 Sample changer - Assigning a position
Program part: Manual control
Here the current rack, lift or robotic arm position can be assigned to a
specific special position.
Rack position
Assign the current rack position to a specific special beaker.
Current position
Shows the current rack position.
Special beaker
Selection of the special beaker to which the current rack position is to be
assigned to.
Range 1 ... 16
Default value 1
[Assign]
Trigger assignment. During the assignment the cursor is displayed as hour-
glass.
Lift position
Assign the current lift position to a specific special position.
Current position
Shows the current lift position in mm.
Work position for
If this option is selected, the current lift position is assigned to the work
position of the tower, of a special beaker or to an external position of the
robotic arm.
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1+2 | Special beaker 1...16 | External
1...4
Default value Tower 1+2
Rinse position for
If this option is selected, the current lift position is assigned to the rinse
position of the tower.