Metrohm tiamo 2.3 Patch 1 - Manual (Page 1618)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1602 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Operation
Selection whether the pump or valve should be switched on/off manually
or whether they should be switched on for a defined duration and then
automatically be switched off.
Selection On/Off | Duration
Default value On/Off
Duration
Entry of the duration during which the pump/valve should remain
switched on. This field only appears for Operation = Duration.
Range 1 ... 999999 s
Default value 60 s
[Start]
Start pump 2. In the status display the running time since start is shown.
[Stop]
Stop pump 2.
8.4.4.6 Sample changer - Heater/Gas
Program part: Manual control
Here the heater and gas flow on the 774 and 874 Oven Sample Processor
can be switched on and off.
Heater
Heat the oven up to the desired temperature during the defined heating
up time.
Temperature
Temperature at which the oven has to be heated. With Init it is heated up
to the initial temperature set on the instrument.
Range 50 ... 250 °C
Default value 50 °C
Selection Init
Heating time
Duration of the heating up period until reaching the desired temperature.
Range 1 ... 999 min
Selection off
Default value off
[Start]
Start the heater. In the status display the current temperature is shown.