Metrohm tiamo 2.3 Patch 1 - Manual (Page 1614)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1598 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
[Start]
Start moving to the target position. Start moving to the target position.
After the start, the button changes to [Stop], the two lower buttons are
shown as inactive (gray) and Move… instead of Ready is displayed as
status message.
Move the lift upwards for as long as this button is pressed.
Move the lift downwards for as long as this button is pressed.
Robotic arm position
Set the robotic arm position (angle) on the selected tower.
Current position
Shows the current position of the robotic arm in °.
Target position
Selection or entry of the robotic arm position to be moved to.
Range 0.0 ... 330.0 °
Default value 0.0 °
Selection External 1...4
Swing rate
Swing rate for manual control of the Swing Head on the sample changer.
Range 10 ... 55 °/s
Default value 20 °/s
[Start]
Start moving to the target position. After the start, the button changes to
[Stop], the two lower buttons are shown as inactive (gray) and Move…
instead of Ready is displayed as status message.
The robotic arm continues moving to the left (toward 0°) at a swing rate
of 20°/s, as long as this button is pressed.
The robotic arm continues moving to the right (toward 330°) at a swing
rate of 20°/s, as long as this button is pressed.