Metrohm tiamo 2.3 Patch 1 - Manual (Page 1302)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1286 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Record message
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be docu-
mented in the determination.
Message by E-mail
on | off (Default value: off)
If this option is enabled, the message defined in the text box will be sent
to the address defined under [E-mail].
[E-mail]
Open the dialog window Send E-mail for defining the E-mail parameters
(see Chapter 2.6.1, page 95).
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted in addition to
the message defined above.
5.6.10.6 SEQUENCE
5.6.10.6.1 SEQUENCE - Overview
Dialog window: Method ▶ SEQUENCE ▶ Properties... ▶ SEQUENCE - 'Command
name'
Command for combining a sequence of commands to a single command.
This command is only for clear structuring of methods.
Appearance
The command has the following appearance:
Parameters
The parameters for the command SEQUENCE are configured in the fol-
lowing dialog window:
￭ SEQUENCE
Command variables
The following command variables are generated in the method run by the
command SEQUENCE and can be used in formulas under the designation
'Command name.Variable designation':