Metrohm tiamo 2.3 Patch 1 - Manual (Page 402)

4.8 Subwindow Curves ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
386 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
For TET commands
Selection
Volume [mL] | Measured value [°C] | dT/dV [°C/
mL] | ERC | Time [s] | Calculated 1...3 | External
1...3
Default value Volume [mL]
For MEAS commands
Selection
Time [s] | Measured value | dMW/dt | Temper-
ature [°C] | Calculated 1...3 | External 1...3
Default value Time [s]
For MEAS T/Flow commands
Selection
Time [s] | Measured value | Flow [mL/min] |
Calculated 1...3 | External 1...3
Default value Time [s]
For MEAS TC Cond commands
Selection
Temperature [°C] | Measured value | Time [s] |
dMW/dt | Calculated 1...3 | External 1...3
Default value Temperature [°C]
For MEAS Ref commands
Selection
Wavelength [nm] | Intensity [Counts] | Inten-
sity Dark [Counts] | Transmission [%] | Satura-
ted pixels
Default value Wavelength [nm]
For MEAS TMF commands
Selection
Time [s] | Transmission [%] | Absorbance
[mAU] | d
ε/dt [mAU/min] | Temperature [°C]
Default value Time [s]
For MEAS Spec commands
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels
Default value Wavelength [nm]
For MEAS Opt commands
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Tempera-
ture [°C] | d
ε/dt [mAU/min] | Calculated 1...3 |
External 1...3
Default value Time [s]