Metrohm tiamo 2.3 Patch 1 - Manual (Page 352)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
336 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Smoothing factor x axis
Factor for smoothing on the x axis.
Range 0.01 ... 1000
Default value 0.01
Smoothing factor y-axis
Factor for smoothing on the y axis.
Range 0.01 ... 1000
Default value 0.01
4.5.2.6.4.6.4.5 Properties curve evaluation - Options
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Curve evalua-
tion ▶ [Edit] ▶ Curve evaluation ▶ Properties ▶ Options
On the tab Options the parameters for the graphical display of the curves
can be set.
Command type
Shows the type of command for which the curve properties can be
defined. The curve properties defined for each command type for the
reprocessing window are saved per client.
Autoscaling
on | off (Default value: on)
If this option is switched on then all axes in the curve window will be
scaled automatically. In this case the fields Start value and End value
cannot be edited.
Display grid
Display grid
on | off (Default value: off)
If this check box is actjvated then a grid will be shown against the back-
ground.
Grid type
Selection of the type of grid line.
Selection 5 line types
Grid color
Selection of the grid line color.
Selection 13 colors | gray
Default value gray