Metrohm tiamo 2.3 Patch 1 - Manual (Page 1651)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 How to proceed?
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 1635
The selected determinations are recalculated. The results of this recal-
culation are entered automatically in the subwindow Result dis-
play.
6 If desired, save the modified method with [Save as...] under the
same name or under a new name.
If the modified method is saved under the name of an existing
method then all the earlier method versions will be deleted and a
new version with the number 1 will be generated.
7 In the dialog window Reprocessing click on [OK].
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and
the dialog window Reprocessing will be closed. This button is inac-
tive when the recalculation has not yet been triggered and if not all
the selected determinations could be reprocessed.
Modify statistics
Note
The tab Statistics will only be shown when the last determination (and
only this one) is selected from a set of determinations which, because
of the statistics defined in the method, belong together.
1 Change to the Statistics tab.
2 In the field Result name, select the result whose Result value is to
be displayed.
3 Select desired determination whose result value(s) should be
switched on or off for the statistics.
4 If only the selected result of the determination has to be switched on
or off for the statistics, click on [Result on/off].
If the result is switched off, an asterisk (*) appears behind the result
value, is it switched on again, the asterisk disappears.
5 If all results of the selected determination have to be switched on or
off for the statistics, click on [Determination on/off].