Metrohm tiamo 2.3 Patch 1 - Manual (Page 383)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 ￭￭￭￭￭￭￭￭ 367
s(abs):
Shows the absolute standard deviation for statistically evaluated results.
s(rel):
Shows the relative standard deviation for statistically evaluated results.
Minimum:
Shows the minimum value for statistically evaluated results.
Maximum:
Shows the maximum value for statistically evaluated results.
n:
Shows the number of measurements for statistically evaluated results.
4.7.3 Results - Raw data
Tab: Database ▶ Results ▶ Results
On the tab Raw data the evaluation results of commands with evalua-
tions are shown.
"Command name"
For each CALC command the raw data is displayed in six columns:
Column 1
Display of the command type.
Column 2
Display of the variable designation for the raw data.
Columns 3-6
Display of the raw data.
The following tables show the raw data depending on the command type.
For each variable the Variable name, Unit and Number of decimal
places is indicated.
Table 1 Command DET pH
Column 2: Varia-
ble Column 3 Column 4 Column 5 Column 6
EP# EP#.VOL, mL, 4 EP#.MEA, pH, 3 EP#.TIM, s, 1 EP#.TEM, °C, 1
FP# FP#.VOL, mL, 4 FP#.MEA, pH, 3 FP#.TIM, s, 1 FP#.TEM, °C, 1
HP# HP#.VOL, mL, 4 HP#.MEA, pH, 3 HP#.TIM, s, 1 HP#.TEM, °C, 1
MI MI.VOL, mL, 4 MI.MEA, pH, 3 MI.TIM, s, 1 MI.TEM, °C, 1