Metrohm tiamo 2.3 Patch 1 - Manual (Page 1150)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1134 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Desig-
nation Description
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command has
never ended
.LCO Loop counter = current quantity of completed runs, both
of Repeat loops and of While loops
.LST Start time of the loop command (Date/Time)
.SLO Electrode slope calculated from the calibration
5.6.5.12.2 CAL LOOP pH - Properties
Dialog window: Method ▶ CAL LOOP pH ▶ Properties... ▶ CAL LOOP pH - 'Com-
mand name'
The number of buffers and the buffer type are defined in the dialog win-
dow CAL LOOP pH - 'Command name'.
Command name
Name of the command.
Input 25 characters
Buffers
Number of buffers
Selection of the number of buffers with which the pH calibration is to be
carried out.
Selection 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
Default value 2
Buffer type
Selecting a predefined buffer series for the pH calibration.
If these buffers are used, tiamo will recognize the particular buffer auto-
matically.
Selection Metrohm | NIST | DIN | Fisher | Fluka Basel |
Mettler | Merck CertiPUR 20°C/Titrisol | Merck
CertiPUR 25°C | Beckman | Custom | Special |
Radiometer | Baker | Hamilton DURACAL | Pre-
cisa
Default value Metrohm
Custom
The custom buffer series defined in the configuration under
Tools
▶ Templates ▶ Custom calibration buffers is used.