Metrohm tiamo 2.3 Patch 1 - Manual (Page 1360)

6.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1344 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
6.3.4.2 Options - General
Tab: Configuration ▶ Tools ▶ Options... ▶ Options ▶ General
Dialog language
Dialog language
Selection of the dialog language.
Selection German | English | additional languages
(dependent on installed language patches)
Default value English
Note
For the modified setting to become effective the program must be
restarted.
Emergency stop button
If this option is activated, then the emergency stop button will be shown
in all program parts.
Selection on | off
Default value off
This button can be moved to any position with the left mouse button
pressed down and is shown right at the top on the screen both in the pro-
gram window and outside it on the Windows desktop. A mouse click on
this button immediately stops all running determinations on all activated
workplaces. When this happens, all devices are stopped (including pumps;
any device commands that may have been started will be carried out to
their ends, e.g. PREP with Dosino) and the exit track will be started. The
emergency stop is effective even if no user is logged in, e.g. when the
user has been logged out automatically.
The emergency stop has no effect on running actions in the manual con-
trol, each of which must therefore be stopped with .
6.3.4.3 Options - Save
Tab: Configuration ▶ Tools ▶ Options... ▶ Options ▶ Save
Save on closing
Here you can define the settings to be saved when the program is exited.
If the option is activated, the current view with its settings will be saved