Metrohm tiamo 2.3 Patch 1 - Manual (Page 410)

4.8 Subwindow Curves ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
394 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
For MEAS TMF commands
Selection
Time [s] | Transmission [%] | Absorbance
[mAU] | d
ε/dt [mAU/min] | Temperature [°C] |
off
Default value off
For MEAS Spec commands
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value off
For MEAS Opt commands
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Tempera-
ture [°C] | d
ε/dt [mAU/min] | Calculated 1...3 |
External 1...3 | off
Default value off
For CAL Spec-commands
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels | off
Default value off
Label
Freely definable axis label for the y1 axis. With auto the designation from
the field Size will be used.
Selection 50 characters | auto
Default value auto
Curve
Curve color
Selection of a color for the line of the curve.
Selection 13 colors | pink
Default value pink
Symbol
Selection of the symbol for the display of the individual measuring points.
Not editable for MEAS Ref and MEAS Spec commands
Selection
5 symbols | no symbol
Default value no symbol