Metrohm tiamo 2.3 Patch 1 - Manual (Page 310)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
294 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Sensor name.
Sensor type.
Order number of the sensor.
Serial number of sensor.
Date on which the sensor was used for the first time.
Slope of the sensor.
Cell constant of the conductivity sensor.
Electrode zero point of the pH sensor.
Ion (valency) of the ISE sensor.
Electrode zero point of the sensor.
Blank value of the ISE sensor.
Calibration temperature.
Calibration date.
Calibration method.
User
Measuring input at calibration.
Date of the electrode test.
Result of the electrode test.
... robe> Data of the thermoprobe sensor.
4.4.4.3.11 XML export - Sample solutions (TC conductivity)
XML export
– dynamic=""> Sample solutions (TC conductivity)
– Data on sample solution (TC conductivity).
– ... tionName> Name of the sample solution (TC conductivity).
– ... Date> Assignment date for sample solution (TC conductivity).