Metrohm tiamo 1.3 Manual - Manual (Page 94)

68 General program functions
Start manual dosing for the selected dosing device. Dosing will continue for
as long as the button is pressed down. The added volume is shown live.
Note
Parameters that are altered after dosing has started only apply to the next dosing
procedure.
Start filling the buret for the selected dosing device. During the filling pro-
cedure the volume display is reset to
0.0000 mL .
2.6.6 Stirring
If a stirrer connected via MSB or a stirrer connection is selected in the Select de-
vice subwindow then all the possible functions and parameters for the stirrers will
appear in the Functions/Parameters subwindow.
Stirrer functions
The stirrer functions are shown on the following tabs:
• Switch on/off
• Continuous operation
Devices
The stirrer functions can be carried out with stirrers that are connected to the fol-
lowing instruments:
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 784, 785, 794, 795, 798,
799
Titrando: 808, 809, 835, 836, 841, 842, 855, 857, 888, 890
Dosing Interface: 846
Sample Changer: 730, 774, 778, 789, 814, 815, 855