4 restore configuration data – Metrohm tiamo 1.3 Manual User Manual
Page 846
820
How to proceed
3. Select
Backup directory.
4.
Select or enter
Backup name
. If an existing backup file is selected it will be overwrit-
ten.
Note
If the backup directory is on a network drive the backup date should be added
manually to the
Backup name
because the backup date information is not avail-
able on restoring.
5.
Start manual backup of the configuration database with
[Start]
.
The configuration database is saved in the selected directory.
Backup database automatically
1.
Select program part Configuration.
2.
Click on menu item
File, Backup, Automatically
.
The window
Backup configuration data automatically
opens.
3.
Enable the option
Automatic backup
.
4. Enter
Interval
for backup monitoring or date for
Next backup
.
5. Select
Backup directory
.
6. Close
window
Backup configuration data automatically
with
[OK]
.
The configuration database is automatically saved in the selected directory at the
desired time.
7.2.4
Restore configuration data
tiamo light, tiamo full
1. Close
tiamo.
2. Start
ConfigRestore.exe
in the program directory
...\tiamo\bin
.
The dialog window
Restore configuration data
opens.
3. Select
the
Backup directory
that contains the desired backed up configuration da-
tabase.
4.
Select or enter the
Backup name
for the desired database.
5.
Start configuration database revovery with
[Start]
.
tiamo multi
1.
Make sure that tiamo is closed on all clients connected to the server and on the
server itself.
2. Start
ConfigRestore.exe
in the program directory
...\tiamo\bin
on the server.
The dialog window
Restore configuration data
opens.
3. Select
the
Backup directory
that contains the desired backed up configuration da-
tabase.
4.
Select or enter the
Backup name
for the desired database.
5.
Start configuration database revovery with
[Start]
.