Metrohm tiamo 1.3 Manual - Manual (Page 153)

Subwindow Run 127
Device assignment
If at the Start test it is discovered that no device has been assigned for a device-
specific command then the window Device assignment appears for assigning the
device:
Command type
Shows the command type.
Command name
Shows the command name.
Device type
Shows the device type selected in the command.
Device name
Device name
Selection of a device from the device table. Only those devices being able
to execute the command are selectable.
Working sample table
Load new and empty sample table
With the menu item Sample table, New on the tab Determination series a new and
empty sample table loaded as a working sample table, i.e. all existing sample
data lines are deleted.
Load sample table
With the menu item Sample table, Load... on the tab Determination series the window
Load sample table opens in which one of the globally available sample tables can
be selected and loaded as working sample table.
List of sample tables
The list of sample tables contains information about all the saved sample
tables. The tables cannot be edited. With a click on the column title (column
Name , Saved , Saved by , Lines , Comment ) the table can be sorted according
to the selected column in increasing or decreasing sequence.
Name
Name of sample table.
Saved
Date and time at which the sample table was saved.
Saved by
Short name of the user who saved the sample table.