Metrohm tiamo 1.3 Manual - Manual (Page 717)

Subwindow Devices 691
Add new device
Devices that are connected to the PC via an RS232 interface must be added
manually to the device table with
Edit, New... . This opens the dialog window Device
selection .
The required new device must be selected from the tree-form list that is shown,
which contains all the devices known to the program (arranged according to de-
vice type). When the dialog window has been closed with
[OK] the Properties win-
dow opens automatically for entering the device data.
When the properties window has been closed the new device with its set parame-
ters is entered in the Device table and the connection is tested. If the connection
is
ok , then the further device information is read in from the device.
Delete device
With Edit, Delete the device selected in the device table is deleted.
Note
Only devices that are not connected up can be deleted.
Print devices list
With Edit, Print (PDF)... the dialog window Print list of devices (PDF) opens.
Orientation
Portrait
[ on ], off
Print the device table in portrait format.
Landscape
on, [ off ]
Print the device table in landscape format.