Column display, Add new sensor – Metrohm tiamo 1.3 Manual User Manual

Page 814

788

Configuration

Column display

With

Edit, Column display...

the dialog window

Column display

opens. Here you can

define the columns to be shown in the Sensor table.

Columns available

Shows all the fields that can be shown as columns in the Sensor table.

Columns displayed

Shows all the fields that will be shown as columns in the Sensor table. The
default situation is that the columns

Sensor name, Sensor type, Measuring in-

put, Start up, Expiry date, Slope, pH(0)/E(0)

and

Next calibration

will be

shown. The two columns

Sensor name

and

Sensor type

are always present

and cannot be removed.

Adds the selected column to the table.

Removes the selected column from the table.

Alters the sequence of shown columns by moving the selected column up-
ward or downward.

Add new sensor

In order to add a new non-intelligent sensor to the Sensor table the menu item

Edit, New

must be pressed and then one of the following possible sensor types

must be selected: