Metrohm tiamo 1.3 Manual - Manual (Page 560)

534 Method
The calibration can be carried out by manual changing of buffers/standards or by
automatic changing in combination with a Sample Processor.
Commands
The following commands can be selected for calibration:
•
CAL LOOP pH
Calibration loop for calibrating pH electrodes.
• CAL MEAS pH
Measuring command for calibrating pH electrodes.
• CAL LOOP Conc
Calibration loop for calibrating ion selective electrodes (ISE electrodes).
• CAL MEAS Conc
Measuring command for calibrating ion selective electrodes (ISE elec-
trodes).