Metrohm tiamo 1.3 Manual - Manual (Page 681)

Administration 655
Add user
There are two ways of adding a new user:
• Select user group and the context-sensitive menu item Add user .
• Select user group and press button .
In both cases this opens the dialog window Add user .
User
24 characters
Short name of new user that must be used to log in at program start. After
the name has been entered a Start password must be issued with which
the user is entered in the list of users.
Users
User information
If in the left-hand side of the dialog window User administration a user in a user
group has been selected then details of the user will be shown at the right-hand
side.
User
24 characters
Shows the short name of the user that must be entered in the field User .
This name is defined when a new user is entered for the first time and can-
not be subsequently altered.
Full name
256 characters
Full name of the user.
Status
Shows the current status of the user. Only users of the group Administrators
can alter the status.
enabled
Users with the status enabled can log in in the usual way. An exception is
the first log in after a change in status from disabled or removed to enabled .