Metrohm tiamo 1.3 Manual - Manual (Page 873)

Sample tables 847
7.9 Sample tables
7.9.1 Create new sample table
1. Select program part Workplace.
2. Click on symbol or menu item Tools, Sample table, New... .
The window Sample table opens and displays an empty sample table.
3. Click on menu item Sample table, Properties... in the dialog window Sample table .
The window Properties - Sample table opens.
4. Define properties for the new sample table and close the window with [OK] .
5. Click on menu item Edit, Edit line in the dialog window Sample table .
The window Edit line - Sample table opens.
6. Select Method out of the desired method group, enter Sample position , sample
identifications ID1...ID8 , Sample size and Sample size unit and click on [Apply] .
The current sample data will be entered in the corresponding line of the sample
table.
7. Repeat step 6 for each desired determination.
8. Close window Edit line - Sample table with [Close] .
9. Click on menu item Sample table, Save as... in the dialog window Sample table .
The window Save sample table opens.
10. Enter desired name in the field Name and click on [Save] .
The sample table is saved under the required name.
7.9.2 Edit sample table
1. Select program part Workplace.
2. Click on symbol or menu item Tools, Sample table, Open... .
The window Open sample table opens.
3. Select desired sample table and click on [Open] .
The window Sample table opens and displays the selected sample table.
4. Click on menu item Sample table, Properties... in the dialog window Sample table .
The window Properties - Sample table opens.
5. Define properties for the sample table and close the window with [OK] .
6. Select desired line to be changed in the dialog window Sample table .
7. Click on menu item Edit, Edit line in the dialog window Sample table .
The window Edit line - Sample table opens.
8. Select Method out of the desired method group, enter Sample position , sample
identifications ID1...ID8 , Sample size and Sample size unit and click on [Apply] .
The current sample data will be entered in the corresponding line of the sample
table.
9. Repeat step 8 for each desired determination.
10. Close window Edit line - Sample table with [Close] .
11. Click on menu item Sample table, Save in the dialog window Sample table .
The sample table is saved.