Metrohm tiamo 1.3 Manual - Manual (Page 815)

Subwindow Sensors 789
• pH electrode
•
Metal electrode
• ISE electrode
• Temperature sensor
•
Other sensor
The Properties window then opens automatically for the configuration of the sen-
sor. If the sensor type
ISE electrode is selected then the dialog window New ISE
electrode will open first for the definition of the measuring ion.
Ion
Ag, BF4, Br, Ca, Cd, Cl, CN, Cu, [ F ], I, K, Na, NH4, NO2, NO3, Pb, S, SCN, SO4,
Surfactant, Custom
Selection of the measuring ion from the list or defines another ion with Cus-
tom . The valency of the selected measuring ion will also be shown auto-
matically.
Name
Name: [ empty ], max. 6 characters
Valency: -4, -3, -2, -1, +1, [ +2 ], +3, +4
Name for the self-selected ion and also selects the valency. This parameter
is only visible when in the field
Ion Custom has been selected.
Delete sensor
With Edit, Delete the sensor selected in the sensor table is deleted.
Print sensor list
With Edit, Print (PDF)... the dialog window Print list of sensors (PDF) opens.
Orientation
Portrait
[ on ], off
Print the sensor table in portrait format.
Landscape
on, [ off ]
Print the sensor table in landscape format.
The sensor table is produced in the required format as a PDF file and can
be opened directly with Acrobat Reader; it can then be printed out and/or
saved.