Metrohm tiamo 1.3 Manual - Manual (Page 224)

198 Database
Command type
[ DET ], MET, SET, KFT, KFC, MEAS, MEAS T/Flow
Shows the command type for which a curve is to be produced.
Command name
[ not defined ], 50 characters
Name of the command for which the curve is to be produced. With not de-
fined the first curve present in the determination with the selected Command
type will be produced as default.
Note
In the command name, the index in the format .# must be specified additionally
(e.g. Chloride.1 ).
Autoscaling
[ on ], off
If this option is enabled then all axes in the curve window will be scaled
automatically. In this case the fields
Start value and End value cannot be ed-
ited.
Show grid
on, [ off ]
If this option is enabled then a grid will be shown against the background.
Grid type
Select type of line
Selection of the grid line type.
Grid color
Color selection, [ dark gray ]
Selection of the color for the grid lines.
Background
Background color
Color selection, [ white ]
Selection of the color for the curve background.
Show end points
[ on ], off
If this option is enabled then the endpoints found will be shown on the
curve with the symbol
♦ and labeled with EP# (potentiometric endpoints),
BP# (break point) or FP# (fixed endpoint).
Automatic EPs
Color selection, [ black ]
Selection of the color for automatically set endpoints.
Manual EPs
Color selection, [ light red ]
Selection of the color for manually set endpoints.
Show evaluation lines
on, [ off ]
If this option is enabled then the evaluation lines (tangents, auxiliary lines)
will be shown.
Tangents
Color selection, [ green ]
Selection of the color for tangents and evaluation lines.
Auxiliary lines
Color selection, [ blue ]
Selection of the color for the auxiliary lines.