Metrohm tiamo 1.3 Manual - Manual (Page 278)

252 Database
Scaling
Start value
1 E-8 ... [ 0.0 ] ... 1 E+8
Initial value for scaling the y-axis.
End value
1 E-8 ... [ 1000.0 ] ... 1 E+8
Final value for scaling the y-axis.
Curve
Curve color
Color selection, [ pink ]
Selection of the color for the curve line.
Symbol
Symbol selection, [ off ]
Selection of the symbol for the display of the individual measuring points.
With off the individual measuring points are not shown.
Note
For curves with more than 100 measuring points, the individual measuring points
will not be shown any more, even if a symbol has been selected.
Symbol color
Color selection, [ pink ]
Selection of the color for the measuring point symbol.
Smoothing
[ on ], off
Switches curve smoothing on and off. The smoothed curve will be shown
as dotted line.
Smoothing factor x axis
[ 0.01] ... 1000
Factor for smoothing on the x axis.
Smoothing factor y axis
[ 0.01] ... 1000
Factor for smoothing on the y axis.
Also show original curve
on, [ off ]
If this option is switched on then in addition to the smoothed curve the
original curve will also be shown (dotted, same color).
Options
Options for the graphical display of the curves.