Metrohm tiamo 1.3 Manual - Manual (Page 860)

834 How to proceed
Backup database automatically
1. Select program part Database.
2. Click on symbol or menu item File, Database manager... .
The window Database manager opens.
3. Select desired database and click on [Properties] .
The window Properties - database opens.
4. On tab General , enter Comment on database.
5. On tab Backup, enable the option Backup monitoring .
6. Enter Interval for backup monitoring or date for Next backup .
7. Enable option Start backup automatically .
8. Select Backup directory .
9. Close window Properties - database with [OK] .
The database is automatically saved in the selected directory at the desired time.
7.4.5 Restore database
1. Select program part Database.
2. Click on symbol or menu item File, Database manager... .
The window Database manager opens.
3. Click on [Restore] in the dialog window Database manager .
The window Restore databases opens.
4. Select the Backup directory that contains the desired backed up database.
5. Select or enter the Backup name for the desired database.
6. For Save as , enter name under which the database is to be restored.
7. Start database revovery with [Start] .
Note
Existing databases cannot be overwritten, i.e. they must first be deleted so that
the database can be recovered under its old name.
7.4.6 Delete database
1. Select program part Database.
2. Click on symbol or menu item File, Database manager... .
The window Database manager opens.
3. Select desired database.
4. Click on menu item Edit, Delete in the dialog window Database manager .
Note
Databases that are open cannot be deleted.