Metrohm tiamo 1.3 Manual - Manual (Page 172)

146 Workplace
3.8 Subwindow Report
3.8.1 General
Subwindow Report
In the subwindow Report the reports of determinations are shown. The subwindow
can be switched on in the program part Workplace in the definition of the Layout
and so made visible. It can be enlarged and diminished as required; it can also be
maximized.
Tabs
The subwindow Report consists of the following 3 tabs:
•
Latest report
Shows the latest report to have been generated by a REPORT command.
•
Selected report
Shows the report selected in the Report overview.
•
Report overview
Overview of the reports saved in the workplace.
3.8.2 Latest report
On the tab Latest report the latest report to be generated in the method run by a
REPORT command is always shown automatically. The contents and format of the
report are determined by the Report template defined in the REPORT command.
3.8.3 Selected report
On the tab Selected report the report selected in the Report overview is shown. The
contents and format of the report are determined by the Report template defined
in the
REPORT command.
3.8.4 Report overview
On the tab Report overview all the reports saved in the currently selected work-
place are shown in a table in which the lines are arranged in increasing chrono-
logical order. When a new report is received the table is updated automatically.
The table contains the following columns that can be enlarged, diminished and
moved with the mouse:
Date
Time at which the report was generated with date, time and time zone (UTC
± ##).
Report
Command name of the REPORT command used to generate the report.