Metrohm tiamo 1.3 Manual - Manual (Page 510)

484 Method
5.6.6 Measuring commands
Commands for measurements with different measured quantities.
The following measuring commands can be selected:
• MEAS pH
Potentiometric pH measurement with pH electrodes.
• MEAS U
Potentiometric voltage measurement with metal electrodes.
• MEAS Ipol
Voltametric measurement with selectable polarization current (measured
quantity U).
• MEAS Upol
Amperometric measurement with selectable polarization voltage (measured
quantity I).
• MEAS T
Temperature measurement.
• MEAS T/Flow
Temperature and gas flow measurement.
• MEAS Conc
Concentration measurement (direct measurement).
• MEAS Cond
Conductivity measurement.
•
STDADD man
Standard addition with manual addition of the standard addition solution.
• STDADD dos
Standard addition with addition of the standard addition solution from a
dosing device.
• STDADD auto
Standard addition with automatic addition of the standard addition solution
from a dosing device in such a way that a constant potential difference re-
sults.
MEAS pH
Command for potentiometric pH measurements with pH electrodes.
Devices
This command can be executed with the following devices:
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798, 799
Titrando: 808, 809, 835, 836, 841, 855, 857, 888
Appearance
The command has the following appearance: