Metrohm tiamo 1.3 Manual - Manual (Page 599)

Commands 573
Appearance
The command has the following appearance:
Parameters
The parameters for the command PREP are configured in the following dialog win-
dow:
• PREP
PREP - properties
Command name
25 characters, [ Prepare # ]
Name of the command.
Device
Device name
Device name, [ not defined ]
Selection of a device from the device table. Only those devices being able
to execute the command are selectable. Additionally,
not defined can be se-
lected. In this case, the device name must be assigned by the user at the
start of the method.
Device type
Device types, [ Titrando ]
Display or selection of the device type. If a device is selected under Device
name , this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.
If the option
not defined is selected as Device name , all device types being
able to execute the command can be selected independently from the de-
vices in the device table.
Dosing device
Dosing device
[ 1 ] ... 4 (Titrando, 846)
[ 1 ] ... 3 (778, 789, 814, 815, 855)
[ 1 ] ... 12 (730, 774)
[ internal D0 ], external D1, external D2 (736, 751, 758, 799)
Selection of the dosing device to be prepared. All the dosing device con-
nections (MSB) are displayed which are possible with the selected device
type.
Solution
24 characters, solution name, [ not defined ]