Metrohm tiamo 1.3 Manual - Manual (Page 556)

530 Method
Switch off automatically
[ on ], off
The stirrer is automatically switched off at the end of the command if this
option is enabled.
Standard addition
The standard addition parameters are defined on this tab.
Command name
25 characters, [ STDADD dos # ]
Name of the command.
Number of additions
1 ... [ 3 ] ... 19
Number of times the standard solution is to be added.
Volume auxiliary solution
[ 0.000 ] ... 9999.999 mL
Volume of the auxiliary solution (e.g. buffer) to be added to the sample be-
fore the first standard addition.
Addition mode
Fixed volume increments
[ on ], off
If this option is enabled a fixed volume increment muss be added for each
standard addition.
Addition volume
[ 0.00000 ] ... [ 0.100 ] ... 99999.9 mL
Quantity of the fixed volume increment.
Variable volume increments
on, [ off ]
If this option is enabled the defined volume increment muss be added for
each standard addition.
Addition volume 1...19