Metrohm tiamo 1.3 Manual - Manual (Page 73)

Formula editor 47
Parameter
year 00...99 or 1000...9999
month 1...12
day 1...31
The parameter can either be entered directly as a number or as a Variable
of the type
Number . If the parameter does not correspond to the selected
type then it will be automatically converted to it (see Type conversion
"TextToNumber"). If this is not possible then "
invalid " will be returned as the
result of this operation.
Note
Only the whole number part will be used for all parameters.
A variable of the type
Date/Time cannot be transferred as a parameter here.
In both the automatic and the explicit conversion of a Time into the type Num-
ber the number of days since 30 December 1899 at 01 a.m. will be counted.
Note: 30 December 1899 01 a.m. = 0.00000 days, this number is rounded to 5
decimal places; however, e.g. a comparative operation will be carried out with
the exact value!
Return value
Date/Time in the format yyyy-mm-dd hh:mm:ss UTC ±xx
Note
UTC = Universal Time Coordinated: reference time for the different time zones
on the earth. MET (Mean European Time) equals UTC plus 1 hour, in the sum-
mer time UTC plus 2 hours.
Examples
Time(2004;02;02) = 2004-02-02 00:00:00 UTC +1 (depends on the system
time)
Time('CV.Testyear';'CV.Testmonth';'CV.Testday') = date complied from the
Common variables
Time(Date + Time)
Syntax
y = Time(year; month; day; hour; minute; second)
Returns the entered numbers in the format Date/Time .
Parameter
year 00...99 or 1000...9999
month 1...12
day 1...31
hour 0...23
minute 0...59
second 0...59
The parameter can either be entered directly as a number or as a Variable
of the type
Number . If the parameter does not correspond to the selected
type then it will be automatically converted to it (see Type conversion