Metrohm tiamo 1.3 Manual - Manual (Page 218)

192 Database
Height
0.0000 ... (max. page height) mm
Height of the rectangle.
Thickness
0.1 ... [ 0.5 ] ... 10.0 mm
Thickness of the line for the rectangle.
Selection of the line color.
Selection of the type of line for the rectangle.
Switches the fill color on and off.
Selection of the fill color.
Curve field
Curve fields are used for showing determination curves in the report.
Insert
In order to insert a curve field in a report template the corresponding sym-
bol must be selected on the Module bar and then placed on the report
template by creating a field with the left-hand mouse key.
Properties
The properties for the curve field can be set on the following 4 tabs:
•
x Axis
Parameters for the graphical display of the curve on the x axis.
• y1 Axis
Parameters for the graphical display of the curve on the y1 axis (left-hand y
axis).
• y2 Axis
Parameters for the graphical display of the curve on the y2 axis (right-hand
y axis).
• Options
Options for the graphical display of the curve.
Note
The properties are saved individually for each curve field. This means that it is
possible, e.g., to show several different curves for the same measuring com-
mand beside one another in several curve fields.