Metrohm tiamo 1.3 Manual - Manual (Page 235)

Templates for curve overlay 209
Scaling
Start value
1 E-8 ... [ 0.0 ] ... 1 E+8
Initial value for scaling the y-axis.
End value
1 E-8 ... [ 1000.0 ] ... 1 E+8
Final value for scaling the y-axis.
Options
Options for the graphical display of the superimposed curves.
Template name
50 characters
Name for the curve overlay template which is saved in the configuration da-
tabase per client.
Command type
Selection of command types
Selection of the command type from which curves are to be superimposed.
Autoscaling
[ on ], off
If this option is switched on then the x axis in the curve window will be
scaled automatically. In this case the fields
Start value and End value cannot
be edited.
Show grid
on, [ off ]
If this option is switched on then a grid will be shown against the back-
ground.
Grid type
Select line type
Selects the type of grid line.
Grid color
Color selection, [ gray ]
Selects the color for the grid lines.
Background
Background color
Color selection, [ white ]
Selects the color for the curve background.