Metrohm tiamo 1.3 Manual - Manual (Page 692)

666 Configuration
If this option is switched on then the configuration database will be saved
automatically in the defined backup directory at the required time interval.
The whole configuration database (including method groups and methods)
is saved.
If this option is switched off then the following parameters cannot be ed-
ited.
Last backup
Shows the date and time of the last configuration data backup.
Interval
[ 1 month ], 1 ... 999 day(s), week(s), month(s), year(s)
Entry of the time interval after which an automatic backup will take place.
After each automatic or manual backup the interval entered here will be
added to the date of the
Last backup and shown in the field Next backup .
Next backup
Date, [ Last backup + 1 month ]
Date and time at which the next backup is to be carried out.
With
the window Next backup opens for selecting the date (see General
program functions - Edit - Select date).
Backup directory
Selection of a predefined backup directory (see Configuration - Administra-
tion - Program administration - Backup directories).
Note
Make sure that you have read and write access rights on the selected directory.
Backup configuration data manually
With File, Backup, Manually the dialog window Backup configuration data manually
opens:
Backup target
Backup directory
Selection of a predefined backup directory (see Configuration - Administra-
tion - Program administration - Backup directories).
Note
Make sure that you have read and write access rights on the selected directory.
Backup name
50 characters, [ Backup-## ]
Selection of an existing name or entry of a new name for the backup file. If a
backup file that already exists is selected then it will be overwritten.
Note
If the backup directory is on a network drive the saving date should be added
manually to the Backup name because the saving date information is not avail-
able on restroring.