Metrohm tiamo 1.3 Manual - Manual (Page 861)

Configuration data 835
7.5 Configuration data
7.5.1 Export configuration data
1. Select program part Configuration.
2. Click on menu item File, Export .
The window Export configuration data opens.
3. Select desired configuration data.
4. Close window Export configuration data with [OK] .
5. Select or enter name and directory for the export file. If an existing export file is se-
lected it will be overwritten.
6. Start export of the configuration data with [Save] .
The selected configuration data is then saved in a file with the extension .mcfg.
7.5.2 Import configuration data
1. Select program part Configuration.
2. Click on menu item File, Import .
The window Open opens.
3. Select or enter name and directory for the import file *.mcfg and click on [Open] .
The window Import configuration data opens.
4. Select desired configuration data.
Note
Data that is not present in the export file cannot be selected.
5. Start import of the configuration data with [OK] .
The selected configuration data is then imported .
7.5.3 Backup configuration data
General
The configuration data in tiamo is saved in the configuration database. Under
configuration data is to be understood all tiamo method-embracing settings for
devices, titrants/solutions, sensors, common variables and rack data. Configura-
tion data also includes methods, security settings, user administration, program
administration, templates, and Audit Trail.
For local server systems (tiamo light, tiamo full) the configuration database is lo-
cated in the program folder of the computer on which the program has been in-
stalled. In client-server systems (tiamo multi) the configuration database is stored
centrally on the server and saves and contains all the configuration data of all
computers (clients) that are connected to this server.