Metrohm tiamo 1.3 Manual - Manual (Page 281)

Subwindow Determination overview 255
Results of the statistical evaluation (mean value, absolute and relative stan-
dard deviations, number of measured values used for the statistics and sta-
tistics set counter).
If several determinations are selected for reprocessing then the navigation buttons
can be used to switch between showing the results of the individual determina-
tions:
Jumps to first determination.
Jumps to previous determination.
Jumps to next determination.
Jumps to last determination.
Note
If a result value is monitored and if it lies inside the limits defined in the
CALC
command then the text will be shown in green, if it is outside the limits the value
will be shown in red.
Raw data
On the tab Raw data of the subwindow Result view the evaluation raw data of
commands with evaluations will be shown and updated at each recalculation (de-
tails on raw data display see Results - Raw data).
If several determinations are selected for reprocessing then the navigation buttons
can be used to switch between showing the raw data of the individual determina-
tions:
Jumps to first determination.