Metrohm tiamo 1.3 Manual - Manual (Page 725)

Subwindow Devices 699
Int. dosing device D0
Request for dosing device preparation
Selection when the request for carrying out a PREP (prepare) command is to be
shown for the internal dosing device.
At program start
[ on ], off
If this option is switched on then the request to prepare the dosing device
will appear at each program start.
Time interval
on, [ off ]
If this option is switched on then the request to prepare the dosing device
will appear after the time interval defined here.
all
0.1 ... [ 12 ] ... 999.9 h
Time interval after which the request to prepare the dosing device will ap-
pear.
Note
The preparation of internal dosing devices on Titrinos 702, 716, 718, 719,
720, 721, 784, 785, 794, 795, 798 can only be done on the device itself before
starting tiamo.
Ext. dosing device D#