Metrohm tiamo 1.3 Manual - Manual (Page 351)

Commands 325
Message
Text (unlimited)
The message defined here can be put out to different targets if the limits
are exceeded. The Text editor to enter or change the message is opened
with or by double-clicking into the message field.
Display message
[ on ], off
If this option is enabled, all active tracks are halted and the message de-
fined above will be displayed in case the limits are exceeded.
Record message
[ on ], off
If this option is enabled, the message defined above will be documented in
the determination in case the limits are exceeded.
Message by e-mail
on, [ off ]
If this option is enabled, the message defined above will be sent to the ad-
dress defined under
[E-mail] in case the limits are exceeded.
Opening the dialog window Send e-mail for defining the e-mail parameter.
Acoustic signal
on, [ off ]
If this option is enabled, an acoustic signal will be emitted additionally to
the message defined above in case the limits are exceeded.
Action
on, [ off ]
Selecting the action to be taken when the limits are exceeded.
Stop determination
[ on ], off
The current determination (or the conditioning) is terminated and the next
determination of the series is started.
Stop determination and series
on, [ off ]
The current determination (or the conditioning) and the series are termi-
nated.
TRACK
Start command for Normal track.
Appearance
The command has the following appearance:
Parameter