Metrohm tiamo 1.3 Manual - Manual (Page 620)

594 Method
CALC result properties
Result - definition
The result calculation is defined on this tab.
Result name
50 characters, [ Res01 ... Res025 ]
Name of the result. This name will be shown in the result display as well as
in the report. The result name can be used in further calculations as vari-
able
'RS.Result name.VAL' .
Formula
1000 characters
Display of the calculation formula of the result. The Formula editor to enter
the calculation formula is opened with or by double-clicking into the
window. The calculation formula defines the result type ( number , text or
date/time ).
Unit
max. 16 characters, [ empty ], ppm, %, g/L, mg/L, mg/mL, mg/100 g, mol/L,
mmol/L, mL, g, mg, µg, °C, µL, s, S/cm, mS/cm, µS/cm
The result unit is shown and saved together with the result. The unit can be
used in further calculations as variable 'RS.Result name.UNI' .
Decimal places
0 ... [ 2 ] ...5
Number of decimal places of the result. This parameter is ignored for re-
sults of the type
text or date/time .
Assignment
RS01 ... RS25, [ first unallocated result variable ], none
Assignment of the result to one of the 25 result columns RS01 ... RS25 in the
Determination overview. The result will be entered in this column. The result
won't be entered in a result column with
none . In this case it will only be dis-
played in the subwindow Results .