Metrohm tiamo 1.3 Manual - Manual (Page 652)

626 Method
Stop all tracks and waiting for [Continue]
on, [ off ]
If this option is enabled, all tracks currently running are halted and a mes-
sage is displayed. The method run can only be continued with [Continue] .
Waiting time
on, [ off ]
0 ... 9999.9; [ s ], min
If this option is enabled, the method run will be continued automatically af-
ter this waiting time. The text defined below is displayed during the waiting
time.
Message
Text (unlimited)
The message defined here is displayed while the track is halted or during
the waiting time. The Text editor to enter or change the message is opened
with or by double-clicking into the message field. The Formula editor
can be opened out of the text editor as well.
Record message
[ on ], off
If this option is enabled, the message defined above will be documented in
the determination.
Message by e-mail
on, [ off ]
If this option is enabled, the message defined above will be sent to the ad-
dress defined under
[E-mail] .
Opening the dialog window Send e-mail (siehe CALC - Result properties -
Send e-mail) for defining the e-mail parameters.
Acoustic signal
on, [ off ]
If this option is enabled, an acoustic signal will be emitted additionally to
the message defined above.
SEQUENCE
Command for combining a sequence of commands to a single command. This
command is only for clear structuring of methods.
Appearance
The command has the following appearance:
Parameters
The parameters for the command SEQUENCE are configured in the following dialog
window:
•
SEQUENCE