Metrohm tiamo 1.3 Manual - Manual (Page 788)

762 Configuration
Tests the barcode reader connection. The dialog window Check connection
appears.
Check connection
In order to test the connection to a barcode reader, the device must be selected in
the device table and then under
Edit, Properties the properties window is opened
for this device. On the tab Settings the button [Check connection] must then be
pressed.
Opens the dialog window Check connection .
If a barcode is read in with the barcode reader then the received data will
be inserted in the following fields:
Barcode reader ID
Identifier of the barcode reader.
Data
Read-in data.
GLP
GLP test date
Date selection
Date of the last GLP test. This date can be selected after pressing in the
dialog window Select date (see General program functions - Edit - Select
date).
Comment on GLP test
1000 characters, [ empty ]
Comments about GLP test.