Metrohm tiamo 1.3 Manual - Manual (Page 775)

Subwindow Devices 749
Opens the dialog window Load new program version .
Old version
Shows the old device program version.
New version
Shows the new device program version to be loaded.
Loads new program version.
Note
Make sure that the device is not manipulated or switched off during the loading
process and follow the instructions shown.
Towers
On the tab Tower the tower parameters for the tower mounted on the 774 Oven
Sample Processor are shown. These cannot be edited, but must be set on the
device itself via the keyboard.
Max. stroke path
Shows the lowest permitted lift position for the tower. A lift height of 0 mm
corresponds to the "Rest position", i.e. the lift is moved right to the top.
Beaker sensor
Shows whether the beaker sensor for the tower is switched on or off. Each
time that a sample position is moved to the beaker sensor checks whether
a beaker is present or not.