HP Storage Essentials NAS Manager Software - Manual (Page 96)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems 64
Discovering 3PAR Storage Systems
NOTE: You do not need to provide the interop namespace because the management server
includes the interop namespace for 3PAR storage systems in its default list.
IMPORTANT: To be able to discover a 3PAR storage system, the SMI-S server for the 3PAR storage
system must be running. By default, the 3PAR SMI-S server is not started on the array. To start the
SMI-S server, bring up the InForm CLI and run the following command:
startcim
This command starts the SMI-S server within a minute or so.
Discovery from HP SIM
To discover a 3PAR storage system, provide the following information in HP Systems Insight
Manager:
• Provide the IP address or system name for the storage system. See ” Adding an IP Range for
Scanning ” on page 27 or ” Adding a Single IP Address or DNS Name for Discovery ” on
page 28 for more information.
• User name of the storage system.
• Password of the storage system.
Discovery from HP SE
To discover a 3PAR storage system:
1. Click Tools > Storage Essentials > Home. See ” Accessing the Discovery Pages for HP SIM
and HP SE ” on page 19 if needed. Discovery > Setup.
HP NAS Devices Discover the device directly. See ” Discovering HP NAS Devices
on Windows ” on page 87 and
” Discovering HP NAS Devices on
Linux ” on page 88.
NetApp Devices Discover the device directly. See ” Discovering NetApp NAS
Devices ” on page 89.
Sun NAS Devices Discover the server running the
SMI-S provider for the Sun NAS
Devices.
See ” Discovering Sun NAS
Devices ” on page 91.
HP and IBM Tape
Libraries
Provide the IP address, namespace,
user name and password for the
tape library.
See ” Discovering HP and IBM
Tape Libraries ” on page 92
Table 11 Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element Discovery Requirements Additional Information